Original Digital temperature and humidity SHT35 sensor IIC Double pull resistance filter capacitor Customized DIY
Sensor model: SHT35-DIS
The default address of the sensor:0x44 (Note: if you need the other address:0x45, please contact the seller to customize.thanks)
Resistance: double pull resistance (10K) (Note: canceling pullup resistance according to customer requirements)
Filter capacitor: 100nF (Note: canceling filter capacitance according to customer requirements)
Electrical pins: 4PIN (VDD VSS SDA SCL)
PCB size: about 14.3*4.2*1MM
Plug: PHR-4
Cable length: about 15CM (6 inch)
Temperature range: -40 to 125 C
Humidity range: 0 to 100%RH
Fully calibrated, linearized, and temperature
Compensated digital output
Wide supply voltage range, from 2.4 to 5.5 V
I2C Interface with communication speeds up to 1 MHz and two user selectable addresses
Typical accuracy of +/-1.5%RH and +/-0.3 degree C
Very fast start-up and measurement time
Sensor IC: Tiny 8-Pin DFN package